Tilt-a-Rack 410ACR

Tilt-a-Rack Motorcycle Racks and Carriers

Now with an  integrated "load assist wheel chock" and an Extended Ramp

410ACR Aluminum Cycle Rack

Rack your Motorcycle in seconds!

A 1-place tilt-able Motorcycle carrier that hitches to a frame-mounted 2" class III or better receiver hitch. Now with an integrated "load assist wheel chock" included.  These carriers are designed for transporting a wide range of MotoCross, Enduro, and other off-road bikes, all the way from the small pocket bikes to the big scramblers up in the 600 lb. range.

The 210ACR weighs only 51 lbs., has a load capacity of 200 lbs with a wheel channel of 60" long X 6" wide.
The 410ACR weighs only 60 lbs., has a load capacity of 400 lbs with a wheel channel of 72" long X 6" wide.
The 610ACR weighs only 71 lbs., has a load capacity of 600 lbs with a wheel channel is 84" long x 8" wide.

Intended for 600cc or below.

These carriers allow you to carry your Motorcycle behind the smaller space used by sports vehicles because they are very light.  They are also very EASY to use. With the Aluminum construction you get: long lasting quality, ease of use and a great looking carrier behind your vehicle! You will hardly realize it is back there.
 

Requires a 2" frame mounted, class III receiver

1. Just hook up the 410ACR to your 2" receiver hitch, pull out the extension, and unlatch the tilt.
2. Push the Motorcycle up the rack, and the rack latches level.
3. Tie it down, push in the extension, and you're ready to go! (While the other guys are still trying to maneuver their trailers and pulling out the ramps).

NO MORE:

• Cramped pick-up beds
• Dealing with dangerous ramps
• Backing and maneuvering trailers
• Fixing flats
• Buying trailer tires
• Changing or repacking wheel bearings
• Registration and licensing small trailers
• Driving at reduced speed on highways
• Hauling dirty loads in your vehicle

410ACR - Dirt Bike Tilt-a-Rack

The Tilt-a-Rack ATV and Quad Carrier features the following versatile attributes:

These tilting atv carriers can be customized to fit your needs perfectly. We offer a complete line of accessories for the Tilt-a-Rack ATV rack including tie down packages, weatherproof covers, specially designed silent hitch pins, deck covers, height adjusters to adjust the carrier higher or lower and a bogie wheel kit that attaches to the rack and allows a single person to maneuver the atv rack with ease. We Strongly recommend the use of the "Silent hitch Pin" for all tilting ATV racks.